Mechanical Properties of Concrete Using Iron Waste as a Partial Replacement of Sand
DOI:
https://doi.org/10.23918/eajse.v3i3p75Keywords:
Concrete, Sand Replacement, Iron Waste, Compressive Strength, Flexural Tensile StrengthAbstract
The utilising of iron waste in concrete as a partial replacement of sand is attaining enormous significance nowadays, mostly because of the improvement in the strength of concrete and environmental benefits. The aim of this study is to assess the possibility of applying iron waste in different percentages (6%, 12%, 18%, 24%, and 30%) as fine aggregate replacement of sand to increase the strength of concrete. For this purpose, the mix proportion was designed as (1:2.12:2.37) for giving 33 MPa of compressive strength of concrete at 28 days of curing. In order to achieve the goal of the study, laboratory experiments, compressive strength, and flexural tensile strength were conducted to determine the influence of iron waste on the strength of concrete. Thus, based on this study, the progress of strength with the percentages of iron waste in different time was plotted. According to the results, it can be found that 12% of iron waste is more efficient than the other percentages in both compressive and flexural strength because it obtains the maximum strength in the shortest time, and it seems that increasing iron waste more than 12% leading to decrease the strength of the concrete.
References
Alzaed, A. (2014). Effect of iron filings in concrete compression and tensile strength. International
Journal of Recent Development in Engineering and Technology, 3, 121-125.
American Society for Testing (2010). C. o. C. Committee, A. Concrete, and A. S. C. o. T. f.
Strength, Standard test method for flexural strength of concrete (using simple beam with
center-point loading). Philadelphia, Pa.: ASTM International.
ASTM C39 (2015). Standard Test Method for Compressive Strength of Cylindrical Concrete
Specimens. ASTM International.
Bahoria, B., Parbat, D., Naganaik, P., & Waghe, U. (2013). Comprehensive literature review on use
of waste product in concrete. International Journal of Application or Innovation in
Engineering & Management, 2, 387-394.
Dixon, D., Prestrera, J., Burg, G., Abdun-Nur, E., Barton, S., & Bell, L. (1991). Standard Practice for
Selecting Proportions for Normal, Heavyweight, and Mass Concrete (ACI 211.1-91).
Dubey, A., Chandak, R., & Yadav, R. (2012). Effect of blast furnace slag powder on compressive
strength of concrete. International Journal of Scientific & Engineering Research, 3, I094-
I098.
Fanella, D. (2016). Reinforced Concrete Structures: Analysis and Design. New York: McGraw-Hill
Education
Ghannam, S., Najm, H., & Vasconez, R. (2016). Experimental study of concrete made with granite
and iron powders as partial replacement of sand. Sustainable Materials and Technologies, 9,
1-9.
Joshi, R. (2013). Effect of using selected industrial waste on compressive and flexural strength of
concrete. International Journal of Civil and Structural Engineering, 4, 116.
Jayaraman, A., Shenbagamn, N., & Senthilkumar, V. (2017). Eco Friendly Building Materials Used
for High strength and high performance Concrete. International Journal of ChemTech
Research, 10, 23-28.
Raman, S., Safiuddin, M., & Zain, M. (2007). Non-destructive evaluation of flowing concretes
incorporating quarry waste. Asian Journal of Civil Engineering (Building and Housing), 8,
597-614.
Ugama, T., Ejeh, S., & Amartey, D. (2014). Effect of iron ore tailing on the properties of concrete.
Civil and Environmental Research, 6, 7.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Eurasian J. Sci. Eng is distributed under the terms of the Creative Commons Attribution License 4.0 (CC BY-4.0) https://creativecommons.org/licenses/by/4.0/
