Some Properties of Concrete Made with Wood Fibers
DOI:
https://doi.org/10.23918/eajse.v7i1p106Keywords:
Wood Fibers, Wood Fiber Concrete, Mechanical PropertiesAbstract
One of the sustainable construction elements is using waste material, recycled materials in the concrete production process. Coarse aggregate has been obtained from a carpenter sawdust waste in TIU workshop / Erbil. Wood particles were used in different proportions of the cement content. The fresh properties of slump, and water absorption, and the compressive, flexural strengths were measured and discussed.
References
Bayan, S. A., Ayad, A. S., & AbdulQader, I. A. (2004). Some mechanical properties of sawdust concrete. Iraqi Journal of Civil Engineering, 27-34.
Bayan, S. A., Junaid, K. A. (2019). Effect of wood-particles aggregate percentage on some physical properties of concrete. International Conference on Materials Engineering and Characterization IOP Conf. Series: Materials Science and Engineering 574, 012012 IOP Publishing doi:10.1088/1757-899X/574/1/0120121
Oyedepo, O.J., Oluwajana, S.D., & Akande, S.P. (2014). Investigation of Properties of Concrete Using Sawdust as Partial Replacement of Sand. Civil and Environmental Research, 6(2), 35-42.
Ruhal, P. M. (2016). Mechanical and thermal properties of sawdust concrete. A project report submitted in partial fulfillment of the requirements for the award of the degree of Master of Engineering (Structure) Faculty of Civil Engineering Universiti Teknologi Malaysia.
Sajjad, A. M., Tun, H. O., Zuhaib, S., & Sheeraz, M. (2019). Utilization of sawdust in concrete masonry blocks: A review. Mehran University Research Journal of Engineering and Technology. https://researchgate.net/publication/332103398
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Eurasian J. Sci. Eng is distributed under the terms of the Creative Commons Attribution License 4.0 (CC BY-4.0) https://creativecommons.org/licenses/by/4.0/
