Mathematical Modeling of Mass Change in Biosensor Quartz Crystal Microbalance Using Matlab
DOI:
https://doi.org/10.23918/eajse.v3i2p204Keywords:
AT-Cut Quartz Crystals, QCM, Sauerbrey Equation, Mass Change, Matlab ProgramAbstract
The usage of quartz crystal resonators in different fields has developed remarkably. Even though the usage of a quartz crystal microbalance (QCM) dating back to fifties, the current attention is focusing on the liquid state applications. Broadly-based on Kanazawa’s paradigmatic treatment, this investigation confers an emulation model to the hypothesis of the loaded QCM utilizing dissimilar bulk films on its superficies and submerged in a solution.The correlation between the variation in sonorous frequency and the mass of particles adhesive on the surface of the QCM is the heart of the transferal procedure of genetic material from one organism to another in piezoelectric biosensors.Particularly, electrical characteristics, such as phase angle, admittance and the sonorous frequency of loaded and unloaded QCM, are imitated by Matlab program. This data-package calculates the admittance band of a fluctuating QCM layered with a superlative mass and that of a fluctuating QCM layered with a film of a specified solid to reach at a modification factor as a function of layer height. Accordingly, the loaded QCM can be utilized as a biosensor, and the modification to the Sauerbrey equation is not as much of ~3% for the polystyrene layer up to a height of ~15 μm. The simulation results are in excellent agreement with available experimental data.
References
áKeiji Kanazawa, K. (1997). Mechanical behaviour of films on the quartz microbalance. Faraday
Discussions, 107, 77-90 .
Arnau, A. (2008). A review of interface electronic systems for AT-cut quartz crystal microbalance
applications in liquids. Sensors, 8(1), 370-411.
Barzinjy, A., & Zankana, M. (2016). A Novel Application of the Quartz Crystal Microbalance for
Determining the Rheological Properties of the Highly Viscous Liquids. Acta Physica
Polonica A, 130(1), 239-244 .
Beers, K. M. (2012). Characterization of Self-Assembly and Charge Transport in Model Polymer
Electrolyte Membranes .
Bruckenstein, S., & Swathirajan, S. (1985). Potential dependence of lead and silver underpotential
coverages in acetonitrile using a piezoelectric crystal oscillator method .Electrochimica
Acta, 30(7), 851-855 .
Cerda, R. M. (2014). Understanding Quartz Crystals and Oscillators. Artech House.
Dahlin, A. B., Jonsson, P., Jonsson, M. P., Schmid, E., Zhou, Y., & Hook, F. (2008). Synchronized
quartz crystal microbalance and nanoplasmonic sensing of biomolecular recognition
reactions. ACS nano, 2(10), 2174-2182 .
Hu, H., Wang, X., Wang, J., Wan, L., Liu, F., Zheng, H., . . . Xu, C. (2010). Preparation and
properties of graphene nanosheets–polystyrene nanocomposites via in situ emulsion
polymerization. Chemical Physics Letters, 484(4), 247-253 .
Janata, J. (2010). Principles of Chemical Sensors. US:Springer.
Johannsmann, D. (2014). The Quartz Crystal Microbalance in Soft Matter Research: Fundamentals
and Modeling: Springer International Publishing.
Kanazawa, K., & Cho, N.-J. (2009). Quartz crystal microbalance as a sensor to characterize
macromolecular assembly dynamics. Journal of Sensors.
Kanazawa, K. K., & Gordon, J. G. (1985). The oscillation frequency of a quartz resonator in contact
with liquid. Analytica Chimica Acta, 175, 99-105 .
Katz, A., & Ward, M. D. (1996). Probing solvent dynamics in concentrated polymer films with a
high‐frequency shear mode quartz resonator. Journal of Applied Physics, 80(7), 4153-4163 .
Konash, P. L., & Bastiaans, G. J. (1980). Piezoelectric crystals as detectors in liquid
chromatography. Analytical Chemistry, 52(12), 1929-1931 .
LeSar, R. (2013). Introduction to Computational Materials Science: Fundamentals to Applications.
Cambridge University Press.
Lu, C., & Czanderna, A. W. (2012). Applications of Piezoelectric Quartz Crystal Microbalances.
Elsevier Science.
Lu, C. S., & Lewis, O. (1972). Investigation of film‐thickness determination by oscillating quartz
resonators with large mass load. Journal of Applied Physics, 43(11), 4385-4390 .
Miller, J., & Bolef, D. (1968). Acoustic Wave Analysis of the Operation of Quartz‐Crystal Film‐
Thickness Monitors. Journal of Applied Physics, 39(12), 5815-5816 .
Nikolelis, D. P., Krull, U. J., Wang, J & ,.Mascini, M. (2013). Biosensors for Direct Monitoring of
Environmental Pollutants in Field. Springer Netherlands.
Nomura, T., & Iijima, M. (1981). Electrolytic determination of nanomolar concentrations of silver in
solution with a piezoelectric quartz crystal. Analytica Chimica Acta, 131, 97-102 .
Otero, T. F. (2015). Conducting Polymers: Bioinspired Intelligent Materials and Devices. Royal
Society of Chemistry.
Rengier, F., Mehndiratta, A., von Tengg-Kobligk, H., Zechmann, C. M., Unterhinninghofen, R ,.
Kauczor, H.-U., & Giesel, F. L. (2010). 3D printing based on imaging data: Review of
medical applications. International Journal of Computer Assisted Radiology and Surgery,
5(4), 335-341 .
Rocha-Gaso, M.-I., March-Iborra, C., Montoya-Baides, Á., & Arnau-Vives, A. (2009). Surface
generated acoustic wave biosensors for the detection of pathogens: A review. Sensors, 9(7),
5740-5769 .
Rodoplu, D., Sen, Y., & Mutlu, M. (2013). Modification of quartz crystal microbalance surfaces via
electrospun nanofibers intended for biosensor applications. Nanoscience and
Nanotechnology Letters, 5(4), 444-451 .
Rodriguez-Pardo, L., Fariña, J., Gabrielli, C., Perrot, H., & Brendel, R. (2007). Simulation of QCM
sensors based on high stability classical oscillator configurations in damping media. Sensors
and Actuators B: Chemical, 123(1), 560-567 .
Sauerbrey, G. (1959). Use of vibrating quartz for thin film weighing and microweighing. Z. Phys,
155(2), 206-222 .
Schumacher, R., Borges, G., & Kanazawa, K. (1985). The quartz microbalance: a sensitive tool to
probe surface reconstructions on gold electrodes in liquid. Surface Science, 163(1), L621-
L626 .
Smith, A. L., & Shirazi, H. M. (2005). Principles of quartz crystal microbalance/heat conduction
calorimetry: Measurement of the sorption enthalpy of hydrogen in palladium.
Thermochimica Acta, 432(2), 202-211 .
Whitcombe, M. J., Chianella, I., Larcombe, L., Piletsky, S. A., Noble, J., Porter, R., & Horgan, A.
(2011). The rational development of molecularly imprinted polymer-based sensors for
protein detection. Chemical Society Reviews, 40(3), 1547-1571 .
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Eurasian J. Sci. Eng is distributed under the terms of the Creative Commons Attribution License 4.0 (CC BY-4.0) https://creativecommons.org/licenses/by/4.0/
