Energy Efficient Optimization in a Typical School Building: Kurdistan Typical School Buildings as a Case Study
DOI:
https://doi.org/10.23918/eajse.v3i3p83Keywords:
Energy Efficiency, Indoor Environment, IDA ICE Energy Simulation, Building ImprovementAbstract
High energy consumption is one of the most serious problems globally faced today. The building sector is known to be the largest energy consumer. Energy performance in school buildings is very significant, for ascertaining the health and productivity of students and teachers. Analysis of previous studies shows that school buildings present a poor indoor air quality due to the high occupant density of school buildings, especially in classrooms, with approximately four times the occupant density of office buildings, if compared. School buildings also consume a large amount of energy due to the lack of energy saving measures applied to the buildings in Kurdistan. The purpose of this study is to improve the indoor environment and energy performance of school buildings, through analysing, evaluating and improving the indoor environment and energy efficiency of a secondary school typology in Sulaimani city in northern Iraq. Based on the measurements in the school building and the simulation model (using Indoor Climate and Energy (IDA ICE) software 4.7.1) several improvement options were investigated, including window to wall ratio, thermal insulation, and infiltration. As a result an optimal solution model in terms of thermal comfort and energy efficiency was proposed. The optimum model was also simulated and the results were compared with the reference model. The results revealed that the optimum model performed better in both indoor environment and energy consumption than the existing school model.
References
Dall’O, G., Bruni, E., & Panza, A. (2013). Improvement of the sustainability of existing school
buildings according to the leadership in energy and environmental design (LEED)
Protocol: A case study in Italy. Energies, 6(12), 6487-6507.
DES (2015). Directorate of Education in Sulaimani. Annual Report.
Dias, M. J., Ramos, J. E., & Manzano, M. E. (2012). Indoor environment and energy efficiency in
higher schools buildings. Evaluation, 20, 21.
Dragicevic, S., Peulic, A., Bjekic, M., & Krneta, R. (2013). Measurement and simulation of energy
use in a school building. Acta Polytechnica Hungarica, 10(2), 109-120.
Kang, J. E., Ahn, K. U., Park, C. S., & Schuetze, T. (2015). Assessment of passive vs. active
strategies for a school building design. Sustainability, 7(11), 15136-15151.
NREL. NREL. LLC, (2011). Building Energy- Efficient Schools in New Orleans.
Rospi, G., Cardinale, N., Intini, F., & Cardinale, T. (2015). Analysis of energy consumption of
different typologies of school buildings in the city of Matera (Southern Italy). Energy
Procedia, 82, 512-518.
Yousefi, Y., Yousefi, S., & Yousefi, Y. (2015). Energy-Efficiency in Educational Buildings in Iran:
Analysis and Measures. In Proceedings of BS2015: 14th Conference of International
Building Performance Simulation Association (pp. 7-9).
Zanni, D., Righi, A., Dalla Mora, T., Peron, F., & Romagnoni, P. (2015). The Energy improvement
of school buildings: analysis and proposals for action. Energy Procedia, 82, 526-532.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Eurasian J. Sci. Eng is distributed under the terms of the Creative Commons Attribution License 4.0 (CC BY-4.0) https://creativecommons.org/licenses/by/4.0/
